SOFAR 1~4KTL2-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
4.6.WIFI/GPRS module installation
procedure
Step 1: Remove WiFi/GPRS waterproof cover using screw driver.
Step 2: Install WiFi/GPRS module.
Stpe 3: Fasten WiFi/GPRS module using screws.
4.7.Communication method
SOFAR 1~4KTL2-G3 gird-connected inverters offer RS485 (standard)
and Wi-Fi (optional) communication modes:
A. Communication between one inverter and one PC:
1. RS485
Refer to the figure shown below, connect the TX+ and TX- of the
inverter to the TX+ and TX- of the RS485 → USB adapter, and
connect the USB port of the adapter to the computer. (NOTE1)
Figure 4-32
2. WI-FI
To Next Page
Loading...
