SOFAR 1~4KTL2-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
Refer to the figure shown below: (wireless function required for the
PC) . (NOTE4)
Figure 4-33
The operation information (generated energy, alert, operation
status) of the inverter can be transferred to PC or uploaded to the
server via Wi-Fi. You can register on the website.
http://www.solarmanpv.com/portal/Register/Regi_Pub.aspx
Using the Wi-Fi S/N number (NOTE3), then you can login the
website:
http://www.solarmanpv.com/portal/LoginPage.aspx
to remote
monitors the inverter.
B. Communication between multiple inverters and one PC:
1. RS485
Refer to the following figure: RS485 wires are connected in parallel
between inverters, refer to section 4.5 of this manual for wire
connection methods. Connect the TX+ and TX- of the inverter to the
TX+ and TX- of the RS485→USB adapter; connect the USB port of
the adapter to the computer. A maximum of 31 inverters can be
connected in one daisy chain. (NOTE2)
To Next Page
Loading...
