SOFAR 1~4KTL2-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
the DC switch OFF to cut off the high voltage DC of the PV array.
You can also turn the switch in the PV combiner box OFF to cut off
the high voltage DC. Otherwise, serious injury may be caused.
Qualified persons
The customer must make sure the operator has the necessary skill
and training to do his/her job.Staff in charge of using and
maintaining the equipment must be skilled,aware and mature for
the described tasks and must have the reliability to correctly
interpret what is described in the manual. For safety reason only a
qualified electrician, who has received training and / or has
demonstrated skills and knowledge in construction and in
operation of this unit, can install this inverter. Shenzhen
SOFARSOLAR Co., Ltd does not take any responsibility for the
property destruction and personal injury because of any incorrect
use.
Installation requirements
Please install inverter according to the following section. Fix the
inverter on an appropriate objects with enough load bearing
capacity (such as walls, PV racks etc.), and ensure that inverter is
vertical placed. Choose a place suitable for installing electrical
devices. And assure there is enough fire exit space, convenient for
maintenance. Maintain proper ventilation to ensure enough air
cycle to cool the inverter.
To Next Page
Loading...
