SOFAR 1.1K~3KTL User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
Outlines of this chapter
This topic describes how to install the SOFAR 1.1K~3KTL .
Installation notes
3.1. Installation Process
Figure3-1 Installation flowchart
Do NOT install the SOFAR
1.1K~3KTL
on flammable
material.
Do NOT install the SOFAR 1.1K~3KTL in an area used to
store Flammable or explosive material.
The enclosure and heat sink are very hot while the inverter is
working, therefore do NOT install the SOFAR 1.1K~3KTL in
places where you might touch them inadvertently.
Consider the weight of SOFAR
1.1K~3KTL
when transporting
and moving the inverters.
Choose an appropriate mounting position and surface.
Assign at least two persons to install the inverter.
Prepare installation
tools
Determine the
installation