4 4 Product InstallationProduct Installation
4.1 4.1 Tool PreparationTool Preparation
You must obtain the following tools before installing the CH1000:
Number Tool Description Purpose
1
Wire stripper Wire stripping
2
Phillips screw-
driver
Fixed guide clips and
ST5*30 self-tapping screws
3
One-piece screw-
driver
Connect a wire
4
Hammers
Knocking plastic expansion
tubes
5
Percussion drill Wall punching
6
Permanent
marker
Marking the mounting
position
7
Heat gun Heat shrinkable tubing
8
Tape measure Measuring distance
9
Heat shrink tub-
ing
Wrapped cables
10
Multimeter
Check that the cable wiring
is correct
16/92 SOFAR CH1000
Product Installation
To Next Page
Loading...