1.3 1.3 Device identification protectionDevice identification protection
The model number of the CH1000 can be obtained from the nameplate,
which is located on the back of the CH1000.The SN of the CH1000 is located
on the front of the CH1000 in the lower left-hand corner of the QR code.
Please note: The nameplate contains important parameters, please ensure that
it is clearly visible and not defaced, and is strictly prohibited from vandalism.
1.4 1.4 requirementsrequirements
Assemble the product according to the detailed instructions in the follow-
ing sections of this manual, and place the product on an object (wall, rail,
etc.) with appropriate bearing capacity. The place suitable for the installation
of equipment should be selected to ensure sucient fire escape space for
maintenance in case of failure. Maintain proper ventilation conditions to ensure
sucient air circulation for cooling, with less than 90% air humidity during
assembly. If you need to drill holes before installation, ensure that water and
electricity lines in the wall are completely avoided.
1.5 1.5 PrecautionsPrecautions
The product is in the best electrical and mechanical condition when it leaves
the factory. When transporting the product, use the original packaging or ap-
propriate packaging to ensure the safety of the equipment during transporta-
tion. The transportation company is responsible for the damage caused to the
machine during transportation. When taking delivery, please make a thorough
inspection of this product. Notify the responsible shipping company immedi-
ately of any packaging problems that may cause damage to the product, or of
any visible damage to the Product. If necessary, you can ask your system install-
er or SOFARSOLAR for help.
1.5.1 Electrical connection precautions1.5.1 Electrical connection precautions
Please comply with all current national regulations related to the prevention of
electrical accidents when installing this product.
4/92 SOFAR CH1000
Basic Safety Information
To Next Page
Loading...