Sofar CH1000 - System Settings; System Manage

4.Users can view the latest third-party device list by clicking “Update Device
List” in the “Device Manage” column.
If users need to add third-party device, please contact the after-sales person-
nel of Shenzhen SOFARSOLAR Co.Ltd.
7.8 7.8 System SettingsSystem Settings
After logging into the WEB interface, click “System Settings” to enter the inter-
face.
7.8.1. System Manage7.8.1. System Manage
After logging in to the WEB interface, click “System Settings” —— “System Man-
age” to enter the interface.
• System Information
On the System Manage page, System Information column, you can view the
device serial number, software version, and hardware version.
• Firmware Upgrade
On the System Manage page, in the Firmware Upgrade column, click “Up-
grade” and select “Gateway” or “PLC-CCO1” or “PLC-CCO2” or “Double CCO”
depending on the type of device to be upgraded.
Click on “Selective Firmware” to select the latest firmware.
Click “Firmware Upload”, and then click “Start Upgrade” after the upload is
complete.
When the upgrade is complete, click “Exit Upgrade”.
The PLC-CCO1/PLC-CCO2/Double CCO upgrade is only required when the
CH1000 has an external CCO.
• Time Set
On the system manage page, in the time set column, click “Read” to get the
current time and time zone of the device.
Click “Time Set” and “Timezone Set” to set the device time and timezone.
• System Reset
On the system manage page, click “Reset” in the system reset column to reset
the device.
• Log Export
Installation and User Manual 53/92
Parameter Con󰘰guration