Sofar CH1000 - Device Control

8.2.7 Device Control8.2.7 Device Control
1. 1. CH1000 device control
Click the device detail page, select CH1000, and click the “
” button on the
upper right corner to enter the remote control page, as shown in the figure
below. Users can set DRM, feed-in limitation, time zone settings for CH1000.
The feed-in limitation parameters are described in the table below.
Parameter Name Setting Instructions
Enable Enable or disable feed-in limitation
Mode
Setting the mode of feed-in limitation control, only
total power control is supported
Limit power value Setting the power limit value for feed-in limitation
70/92 SOFAR CH1000
SOFAR Cloud /APP Operation