The DRM parameters are described in the following table.
Parameter Name Setting Instructions
DRM enable
General enable switch, all DRM functions do not
take effect when off
DRM0 enable
DRM0 enable switch to turn on or off the function
of DRM0.
DRM5 limit power value
Percentage of inverter generating power limit
when DRM5 is in effect
DRM6 limit power value
Percentage of inverter generating power limit
when DRM6 is in effect
DRM7 limit power value
Percentage of inverter generating power limit
when DRM7 is in effect
DRM8 limit power value
Percentage of inverter generating power limit
when DRM8 is in effect
2. 2. Inverter device control
Click the device detail page, select the inverter, click the “
” button on the
upper right corner to enter the remote control page, as shown in the following
figure. Users can set remote power on/off, input channel for the inverter.
Installation and User Manual 71/92
SOFAR Cloud /APP Operation
To Next Page
Loading...