Sofar CH1000 - Device Manage

7.4.3. WiFi Settings7.4.3. WiFi Settings
After logging into the WEB interface, click “Communication” —— “WiFi Settings”
to enter the interface.
Set the parameters of STA working mode according to the actual situation on
site and click “Write” to set successfully.
7.4.4. PLC Settings7.4.4. PLC Settings
After logging into the WEB interface, click “Communication” —— “PLC Settings”
to enter the interface.
Select the CCO channel according to the actual situation, set the analog pow-
er, digital power and frequency band, and click “Write” to set up successfully.
When the CH1000 is connected externally to a CCO, PLC settings are requi-
red.
7.5 7.5 Device ManageDevice Manage
7.5.1. Device Info7.5.1. Device Info
After logging into the WEB interface, click “Device Manage” —— “Device Info” to
enter the interface.
1. 1. Add Sub-Devices
• Automatic search sub-devices
On the device information page, click “Automatic Device Search” —— “Initiate
Search”.
Once you have searched for all the sub devices, click “Stop Search” —— “Add”
—— “Exit Search”.
• Manually add sub-devices
On the device information page, click “Add Sub-Device”, fill in the device serial
number, device type and device channel, and then click “Sure”.
• Batch import of sub-devices
On the device information page, click “Batch import devices” —— “Click to
download the Excel import template”, fill in the template, and then upload the
completed file.
48/92 SOFAR CH1000
Parameter Con󰘰guration