7.3.9. Communication Security7.3.9. Communication Security
After logging in to the WEB interface, click “Plant Manage” —— “Communication
Security” to enter the interface. After setting, click “Write” to set successfully.
Parameter name Setting instructions
Inverter/meter com-
munication protect
enable
On: set the communication protection function of the inverter/
meter to on.
O: disable the communication protection of the inverter/meter.
Inverter communica-
tion protect time (s)
When the communication protect time between CH1000 and the
inverter is greater than the communication protection time set
by the user, the inverter will turn o automatically.
7.4 7.4 CommunicationCommunication
If users need to let CH1000 network, they can set up the CH1000’s networking
method, of which there are three kinds of networking methods: Ethernet, 4G
and WiFi, and users can choose one of them and set it up according to the
actual situation.
7.4.1. Ethernet Settings7.4.1. Ethernet Settings
Log in to the WEB interface, and then click “Communication” —— “Ethernet
Settings” to enter the interface.
Set up according to the actual situation of the site, and click “Write” to set up
successfully.
Please set the LAN port IP address carefully. If you do need to set the IP
address, please keep the modified IP address in mind.
7.4.2. 4G Settings7.4.2. 4G Settings
Insert the SIM card with internet access into the device, log in to the WEB in-
terface, click “Communication” —— “4G Settings”, and enter the interface.
Set up according to the actual situation of the site, and click “Write” to set up
successfully.
Installation and User Manual 47/92
Parameter Conguration
To Next Page
Loading...