Number Tool Description Purpose
11
Tape rule Measuring distance
12
Protective glove
Wear when installing the
machine
13
Safety goggles
Wear when installing the
machine
14
Respirator
Wear when installing the
machine
4.2 4.2 Installation requirementsInstallation requirements
The user should consider the following factors when installing the CH1000 in
order to ensure its service life, safety in use, etc:
• The product is IP20 rated and should be installed in an indoor or boxed
scenario
• Keep the installation away from sun, rain and snow
• The working environment temperature is -30°C~+65°C
• Working environment humidity range of 5%RH~95%RH
• Please pay attention to the protection against humidity and corrosive
substances
4.3 4.3 Installing CH1000Installing CH1000
The device SN number is axed on the outside of the device, and the first
flight device SN number is a combination of a string of numbers and letters
with S as the first, such as SD002200****. There are many places where you
need to use the SN number in the future, so please keep it appropriately. The
CH1000 supports wall mounting, rail mounting, and desktop flat. The mount-
ing method can be chosen by the user.
Installation and User Manual 17/92
Product Installation
To Next Page
Loading...