5.4 5.4 Connecting EthernetConnecting Ethernet
The WAN port is used for device networking and the LAN port is used to con-
nect local devices.
Number Connected device
WAN port 1 Connecting networking devices such as rout-
ers and switches
LAN port 1 Serve as a commissioning reserve
• WAN port connection
JK\OIKY
2'4
='4
NOTICE NOTICE
−
The network cable communication distance does not exceed 100 meters.
5.5 5.5 Installation of antennas and SIM cardInstallation of antennas and SIM card
• Installation of antennas
Just tighten the corresponding model antenna to the connector on the
CH1000.
Installation and User Manual 29/92
Cable Connections
To Next Page
Loading...