7.6.2. IEC1047.6.2. IEC104
After logging into the WEB interface, click “Protocol Conversion” —— “IEC104” to
enter the interface.
Select “Enable” for “Enable”, and the server port number will be 2404 by de-
fault.
Fill in the “Push Cycle (s)”, the default is 300 seconds to update the data, can be
modified according to the actual situation. Fill in “Public Address”, the default
is 1.
The port number and public address of the device can be modified if neces-
sary.
Finally, click “Submit”.
To modify or delete the configuration content of a single device, you can click
“Modify” or “Delete” in the device list.
• Device Default Configuration
Click “Device Default Configuration” to configure the default IEC104 protocol
for all devices.
Click “System Settings” —— “Reset”, the default configuration will take effect.
• Device Configuration Addition
Click “Add Device Configuration” to configure a single device.
Click on “System Settings” —— “Reset” and the new configuration will take ef-
fect.
• Configuration Export
Click “Configuration Export” to view the current configuration file.
• Configuration Import
CH1000 has a default configuration file when it is shipped from the factory,
the specific content of the protocol can be found in the protocol document
named “Sofar_gateway_IEC104_V1.1_CN”, please contact the after-sales per-
sonnel of Shenzhen SOFARSOLAR Co.Ltd.
If the protocol document is updated, the configuration file will be updated
synchronously, at that time, please contact Shenzhen SOFARSOLAR Co.Ltd.
after-sales personnel to obtain the latest firmware to upgrade the device.
If there is a special need to increase or decrease the configuration content in
the current configuration file, you can click “Configuration Export” to export the
current configuration file and make changes on the file. Then, click “Configura-
tion Import” to import the latest configuration file. Finally, click “System Set-
tings” —— “Reset”, and the new configuration file will take effect.
Installation and User Manual 51/92
Parameter Conguration
To Next Page
Loading...