219
Accessing Diagnostic values
Similar to the History view, there are various values displayed in the graphic view. These values depend on
the particular connected device and/or configured control logic.
All of the values displayed in the key can be selected and deselected at anytime with a left-click to display
individual values (curve) or to display or hide all values (curves). With a right-click, all of the values (cur-
ves) other than the one selected can be hidden.
In the simulation, different view options can be selected for the production and consumption curves.
The following options can be selected:
•
Production curve
• Zero line
• Increasing
• Decreasing
• Constant (a fixed value in watts can be defined here)
• Normal levels of irradiation
• Very high levels of irradiation
• Low levels of irradiation
• Inconsistent levels of irradiation
• Selected day (a particular day can be selected here)
•
Consumption curve
• Zero line
• Increasing
• Decreasing
• Constant (a fixed value in watts can be defined here)
• Normal
• Smooth
• Jagged
• Selected day (a particular day can be selected here)
There is the option to directly switch to the configuration of the Smart Energy switching group by cli
-
cking on the arrow symbol in the top right corner.
To Next Page
