SolarEdge Home Battery 48V - Installation Procedure

Installing the Battery Modules
Battery description
Figure below shows the single battery module with completed connections.
Figure 3: Battery Description
1
CAN-bus (RJ45)
connectionto 
invertercommunication
5 Circuit breaker, 120A
2 Groundingterminals 6
RJ45 communication socket to connect between
battery modules. Not to be used to inverter
communication.
3 DC bat - connectors 7
RS485 Communication socket to connect the
battery module below to this battery module (in a
battery tower)
4 DC bat + connector  
Installing the Battery Modules15
Home Battery 48V Installation Guide MAN-01-00954-1.1