SolarEdge Inline Energy Meter User Manual

NOTE
The AC wires connected to the main terminal block of the inline meter can be
swapped - allowing the grid to be connected to either the upper terminal
blocks or the lower terminal blocks. For further details, see Installing the Inline
Meter on page 17

NOTE
Up to three meters can be connected to a single inverter. Each meter should
perform a different function. Any combination of Energy Net and
Modbus/RS485 communication is supported.
9
Inline Energy Meter with SolarEdge Energy Net Communications

SolarEdge Inline Energy Meter Specifications

General

Brand	SolarEdge
Model	Inline Energy Meter
Category	Inverter
Language	English