Appendix C: Monitoring Platform - Meter Data
If your device is connected to the SolarEdge server, you can view the meter’s readings
in the monitoring platform. Verify that the meter type is set correctly in the Admin page
> Logical Layout > Meter details:
Figure 21: Setting the Meter details in the monitoring platform
Calculated meter readings (also referred to as "virtual meters"), such as self-
consumption, are calculated using the data measured by the meter and the inverters.
The data from the inverters and from installed meters is displayed in the Dashboard and
Charts tabs of the monitoring platform. The displayed data depends on the meter(s)
location: grid connection point (export), or load consumption point (consumption).
The following tables detail the displayed information per meter location.
Appendix C: Monitoring Platform - Meter Data 41
Inline Energy Meter with SolarEdge Energy Net Communications
To Next Page
Loading...
Need help?
General