ADDITIONAL FEATURES
Supported Communication
Interfaces
RS485, Ethernet, ZigBee for Smart Energy
(1)
(optional), Wi-Fi (requires antenna)
(2)
(optional)
Smart Energy Management
Export Limitation and Excess Solar
Charging
(3)
Inverter Commissioning
with the SetApp mobile application using
built-in Wi-Fi access point for local
connection, Cellular (optional)
STANDARD COMPLIANCE
Safety IEC62109, AS/NZS3100
Grid Connection Standards AS/NZS4777:2015
Emissions
IEC61000-6-2, IEC61000-6-3, IEC61000-3-
11, IEC61000-3-12, FCC Part 15 Class B
INSTALLATION SPECIFICATIONS
AC Output Conduit Size / Wire cross
section
25mm Maximum / 1-13 mm
2
DC Input Conduit Size / # of Strings
/ Wire cross section
25mm Maximum / 1-2 srings / 1-13 mm
2
Dimensions with Connection Unit
with Safety Switch (HxWxD)
450 x 370 x 174 mm
Weight with Connection Unit with
Safety Switch
11.4 kg
Noise <25 dBA
Cooling Natural Convection
Operating Temperature Range
-40 to +60
(4)
°F/ °C
Protection Rating IP65 — Outdoor and Indoor
(1)
For more information refer to: https://www.solaredge.com/sites/default/files/se-device-
control-zigbee-module-datasheet.pdf
(2)
Wi-Fi connectivity requires an external antenna. For more information refer to:
https://www.solaredge.com/sites/default/files/se-wifi-zigbee-antenna-datasheet.pdf
(3)
Import/Export meter is required for Export Limitation and for controlled Excess Solar charging
(4)
Full power up to at least 50°C/122°F . For power de-rating information refer to:
https://www.solaredge.com/sites/default/files/se-temperature-derating-note.pdf
Technical Specifications - EV Charging Single Phase Inverter - (Australia) 84
EV Charging Single Phase Inverter MAN-01-00629-1.2
To Next Page
Loading...
