Mounting the Inverter
The inverter is supplied with a mounting bracket kit:
Figure 10: Mounting bracket
NOTE
Make sure the mounting surface or structure can support the weight of the
inverter.
CAUTION!
SolarEdge inverters and power optimisers can be installed at a minimum
distance of 50 m from the shoreline of an ocean or other saline environment, as
long as there are no direct salt water splashes on the inverter or power
optimiser.
1. Determine the inverter mounting location, on a wall, stud framing or pole. It is
recommended to mount the inverter in a location protected from direct sunlight.
2.
To allow proper heat dissipation, maintain the following minimum clearance areas
between the inverter and other objects:
Figure 11: Clearance areas
Chapter 3: Installing the Inverter 28
EV Charging Single Phase Inverter MAN-01-00629-1.2
To Next Page
Loading...
