CAUTION!
This product must be operated under the specified operating
specifications, as described in the latest technical specification datasheet.
Configure the product so that the load connected is not switched on or off
more frequently than specified by the load manufacturer.
Do not connect loads that require a continuous current supply (e.g. fridge,
freezer).
Do not use the product if it is damaged or malfunctioning.
Never connect loads that can cause injuries or fire if they are switched on
unintentionally (e.g. an iron).
Do not let the product come into contact with water or other liquids.
The enclosed documentation is an integral part of this product. Keep the
documentation in a convenient place for future reference and observe all
instructions contained therein.
Plug the device into a wall socket , at a maximum distance of 50 m from the inverter.
Smart Energy Socket
10 Installation
To Next Page
Loading...
