Modifying the Device Operation Mode and Schedules
You can re-configure the device operation mode and schedules at any time:
To Do this
Manually turn the load on or off
Select the device from the Device Manager
screen. Select Mode è Manual and set the
device to either ON or OFF.
Modify the schedule configuration
Select the device from the Device Manager
screen. Select Mode è Auto and set the
parameters of any menu: Smart
Save/Schedule.
Disable or delete a schedule
Select Disable or Remove Schedule from the
Schedule screen.
Disconnect the device(s) from the
network
Select Remove Device or Remove All from the
device screen.
Configuration 19
Smart Energy Socket
To Next Page
Loading...
Need help?
General
