What to do if SolarMax 13MT2 Inverter shows 'No mains' error?
If your SolarMax Inverter displays a 'No mains' error, it means either there is no mains voltage present or the AC supply has been interrupted. To resolve this, check the AC supply to ensure it is properly connected and functioning.
Why does SolarMax 13MT2 show 'Vdc too high' error?
The 'Vdc too high' error on your SolarMax Inverter indicates that the DC input voltage at the specified DC connection is exceeding the acceptable limit. To resolve this, immediately switch off the DC disconnector Q1 and disconnect the PV generator from the inverter. Then, thoroughly check the dimensioning of the PV generator to ensure it is within the inverter's specified operating range.
Identifies users, manual storage, and explains symbols.
Explains symbols displayed directly on the inverter unit.
Details intended use, dangers, and necessary precautions for safe operation.
Explains inverter function, shows circuit diagram, and lists external dimensions.
Guidelines for handling, placement, and protection against environmental factors.
Lists included items and details the physical mounting process.
Overview of available connection points for AC, DC, and communication.
Details surge arresters on DC and AC sides for protection.
Step-by-step guide for connecting AC power cables.
Explains DC input connections for MPP trackers and wiring rules.
Explains status contacts and monitoring of external inputs.
Describes RJ45 ports and requirements for protective conductors.
Information on leakage current sensor and protective conductor requirements.
Procedure for powering up, down, and first-time configuration.
How to use the display, buttons, and navigate menus.
How to view current data and historical performance logs.
Details on adjusting operating parameters and advanced functions.
Accessing device info and performing grid compliance tests.
Overview of software, hardware, and interface setup.
Lists available add-on units like MaxMeteo and MaxDisplay.
Explains indicators for inverter status, warnings, and startup/operation phases.
Icons indicating data transfer via RS485 or Ethernet.
Guides for diagnosing and resolving common operational issues.
Details on how to contact support for technical assistance.
Recommended checks and instructions for end-of-life disposal.
Detailed electrical parameters, efficiency ratings, and operating environmental limits.
Details on configuration parameters and variations by country.
Explains coverage, duration, limitations, and warranty service provisions.
To Next Page
General
