THERMOCUBE II 200-650W THERMOELECTRIC CHILLER MANUAL 52-14790-1
SOLID STATE COOLING SYSTEMS, 167 MYERS CORNERS ROAD, WAPPINGERS FALLS, NY 12590 43
TELEPHONE: (845) 296-1300, FAX: (845) 296-1303, WEB: WWW.SSCOOLING.COM VERSION M2
5. Fire-fighting measures
Suitable Extinguishing Media Use water spray, alcohol-resistant foam, dry chemical or carbon
dioxide.
Unsuitable Extinguishing Media No information available
Flash Point 111 °C / 231.8 °F
Method - DIN 51758
Autoignition Temperature 413 °C / 775.4 °F
Explosion Limits
Upper 15.30 vol %
Lower 3.20 vol %
Sensitivity to Mechanical Impact No information available
Sensitivity to Static Discharge No information available
Specific Hazards Arising from the Chemical
Thermal decomposition can lead to release of irritating gases and vapors. Keep product and empty container away
from heat and sources of ignition.
Hazardous Combustion Products
Carbon monoxide (CO) Carbon dioxide (CO2)
Protective Equipment and Precautions for Firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent)
and full
protective gear.
NFPA
Health Flammability Instability Physical hazards
2 1 1 N/A
6. Accidental release measures
Personal Precautions Ensure adequate ventilation. Use personal protective equipment.
Environmental Precautions Should not be released into the environment. See Section 12 for
additional ecological information.
Methods for Containment and Clean Up Soak up with inert absorbent material. Keep in suitable, closed
containers for disposal.
7. Handling and storage
Handling Wear personal protective equipment. Ensure adequate ventilation. Do
not breathe vapors or spray mist. Avoid contact with skin, eyes and
clothing.
Storage Keep containers tightly closed in a dry, cool and well-ventilated place.
Keep away from heat and sources of ignition.
8. Exposure controls / personal protection
Exposure Guidelines
To Next Page
Loading...
