SOLIS RHI-5G Series User Manual

5. Operation 5. Operation
.36. .37.
Calibrate
2015-02-23 19 35
Total Energy
Power Parameter
5.6.3 Calibrate
By using our data monitoring hardware, the data on monitoring website can automatically
synchronize with the preset total generating power of inverter.
Warranty or maintenance may result in resetting total generating data, this function allow
the maintenance personnel to amend the total generating data of replacement inverter to
the original one.
Figure 5.27 Calibrate
Figure 5.28 Total Energy
Adjusting total generating power
2015-02-23 19 35
Total Energy:
E S C
U P
D O W N E N T
Y E S =< E N T > N O = < E S C >
TotalEnergy
00000 kWh56
This function is used to select corresponding grid standards.
Please refer to the actual LCD setting for the grid standard options.
Figure 5.25 Select Standard
5.6.1 Select Standard
Settings
Select Standard
2015-02-23 19 35
Y E S =< E N T > N O = < E S C >
G59/3
Select Standard:
Press "UP" and "DOWN" to go through the list.
Press "ENT" to check the parameters, press "ENT" again to select the standard.
This function is used to start or stop the generation of the inverter.
Figure 5.26 Set ON/OFF
5.6.2 ON/OFF
Settings
ON/OFF
2015-02-23 19 35
ON
OFF
Y E S =< E N T > N O = < E S C >
STOP

SOLIS RHI-5G Series Specifications

General

Type	Hybrid Inverter
Max DC Voltage	600 V
Max DC Input Power	6500 W
Nominal AC Output Power	5000 W
Max AC Output Power	5500 W
Number of MPPTs	2
Battery Voltage Range	40-60V
Max Charge/Discharge Current	100 A
Protection Degree	IP65
Frequency	50/60 Hz
Operating Temperature Range	-25°C to +60°C
Cooling Method	Natural Convection
Model	RHI-5G
Rated Power Output	5kW
MPPT Voltage Range	90 V - 520 V
Efficiency	97.6%
Communication Interfaces	RS485, WiFi
Nominal AC Voltage	230V