SOLIS RHI-5G Series User Manual

5. Operation 5. Operation
.49..48.
5.6.8 HMI Update
This function is used to update HMI software.
Values are for reference only.
Figure 5.48 HMI Update
HMIUpdate
2015-02-23 19 35
The Current Version:F0
E S C E N T
C A N C E = < E S C > U P D AT E S Y S T E M =< E N T >
5.6.9 DSP Update
This function is used to update DSP software.
Values are for reference only.
Figure 5.49 DSP Update
DSPUpdate
2015-02-23 19 35
The Current Version:00
E S C E N T
C A N C E = < E S C > U P D AT E S Y S T E M =< E N T >
Figure 5.50 BaudRate RS485
Settings
BaudRate RS485
2015-02-23 19 35
Y E S =< E N T > N O = < E S C >
Baud Rate： 9600
E S C
U P
D O W N E N T
5.6.10 BaudRate RS485
This function is to change the internal communication Baudrate.
WARNING:
This function is for maintenance personnel only, wrong operation
will prevent the inverter from working properly.
5.6.7.3 FailSafe ON/OFF
Figure 5.47 FailSafe ON/OFF
Settings
FailSafe ON/OFF
2015-02-23 19 35
ON
OFF
Y E S =< E N T > N O = < E S C >
When this Failsafe function is ON, the inverter will shutdown once it loses
communication with the meter in case of any backflow power exceeding the limit.

SOLIS RHI-5G Series Specifications

General

Type	Hybrid Inverter
Max DC Voltage	600 V
Max DC Input Power	6500 W
Nominal AC Output Power	5000 W
Max AC Output Power	5500 W
Number of MPPTs	2
Battery Voltage Range	40-60V
Max Charge/Discharge Current	100 A
Protection Degree	IP65
Frequency	50/60 Hz
Operating Temperature Range	-25°C to +60°C
Cooling Method	Natural Convection
Model	RHI-5G
Rated Power Output	5kW
MPPT Voltage Range	90 V - 520 V
Efficiency	97.6%
Communication Interfaces	RS485, WiFi
Nominal AC Voltage	230V