85DR-C
62
OS Select For DRAM >
64MB
Select OS2 only if you are running OS/2 operating
system with greater than 64MB of RAM on your
system. Default is “Non-OS2”.
Security Option If you have set a password, select whether the
password is required every time the System
boots, or only when you enter setup.
The choices: system; setup (default).
Report No FDD For
Win95
Yes: BIOS reports “NO FDD” to Win95.
No (default): BIOS will not report “NO FDD” to Win95.
Typematic Rate Setting When Disabled, the following two items (Typematic Rate
and Typematic Delay) are irrelevant. Keystroke repeats
at a rate determined by the keyboard controller in your
system.
When Enabled, you can select a typematic rate and
typematic delay.
Typematic Rate (Chars
/ Sec)
When the typematic rate setting is enabled, you can
select a typematic rate (the rate at which character
repeats when you hold down a key) of 6, 8, 10, 12,
15, 20, 24, or 30 characters per second. Default is
”disabled”.
Typematic Delay
(Msec)
Choices: 250; 500; 750; 1000. This option sets the
time interval for displaying the first and the second
characters. If enabled, the time interval is optional.
To Next Page
Loading...
