SOLTEK SL-85DR-C - 4-6.13 Exit Without Saving

85DR-C
88
4-6.12 Save & Exit Setup
• SAVE & EXIT SETUP allows you to save all modifications you have
specified into the CMOS memory. Highlight this option on the Main Menu
and the following message appears:
“ SAVE to CMOS and EXIT (Y/N) ? Y “
“Y” is for “Yes”, and “N” is for “No”.
Press <Enter> key to save the configuration changes.
4-6.13 Exit Without Saving
• EXIT WITHOUT SAVING option allows you to exit the Setup Utility without
saving the modifications that you have specified. Highlight this option on
the Main Menu and the following message appears:
“ Quit Without Saving (Y/N) ? N “
“Y” is for “Yes”, and “N” is for “No”.
You may change the prompt to “Y” and press <Enter> key to leave this option.