EasyManua.ls Logo

SOLTEK SL-85DR-C - Page 78

SOLTEK SL-85DR-C
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
85DR-C
78
IRQ-3 assigned to PCI Device
IRQ-4 assigned to PCI Device
IRQ-5 assigned to PCI Device
IRQ-7 assigned to PCI Device
IRQ-9 assigned to PCI Device
IRQ-10 assigned to PCI Device
IRQ-11 assigned to PCI Device
IRQ-12 assigned to PCI Device
IRQ-14 assigned to PCI Device
IRQ-15 assigned to PCI Device
Item Help
Menu Level
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
CMOS Setup Utility - Copyright (C) 1984 - 2001 Award Software
IRQ Resources
Reset Configuration
Data
Normally, you leave this Disabled. Select Enabled
to reset Extended System Configuration Data
(ESCD), when you exit Setup if you have installed
a new add-on and the system reconfiguration has
caused such a serious conflict that the operating
system cannot boot.
IRQ RESOURCES If “Resource Controlled By’ is set at “Manual”, this
IRQ Resources option will appear for your
configuration. Press Enter. Please refer to the list
below:
Resource Controlled
By
The Plug and Play AwardBIOS can automatically
configure all the boot and Plug and Play-compatible
devices. If you select Auto, all the interrupt request
(IRQ) and DMA assignment fields disappear, as the
BIOS automatically assigns them.
Choices: Auto(ESCD) (default); Manual)

Table of Contents

Related product manuals