Chapter 4 BIOS Setup
81
Current System Temp. Showing the working System temperature.
2. Use one of the arrow keys to move between options and modify the selected
options by using PgUp / PgDn / + / - keys.
<F1>: “Help” gives options available for each item.
<F5>: Get the previous values. These values are the values with which the
user starts the current session.
<F6>: Load all options with the BIOS default values.
<F7>: Load all options with the Setup default values.
3. Press <ESC> to return to the Main Menu when you finish setting up
all items. please read the following explanatory information for your
SmartDoc Anti-Burn Shield Configuration:
Current CPU1/2 Temp. Showing the working CPU temperature.
FAN1/2/3 Speed Showing the working CPU Fan speed.
+5V/+2.5V/+3.3V Showing the working voltage on board.
VBAT Showing the working battery voltage on board.
5VSB Showing the working standby voltage on board.
Shutdown Tempera-
ture
This feature prevents your CPU from damage by
over heat. If the CPU’s temperature is higher than
“CPU warning temperature” that you select in this
field, the BIOS will shut down your system within 3
seconds.
Vcore Shows CPU core actual voltage value.
To Next Page
Loading...
