Chapter 4 BIOS Setup
83
CPU Clock
Ratio
This item allows you to select the CPU clock ratio
so as to change or overclock the CPU frequency.
However, if CPU clock Ratio is locked, this function
is invalid.
Use CPU Linear
Frequency
This item allows you to adjust the CPU clock by
1MHz stepping. Default CPU clock is 100MHz. Any
overclocking is taking the risk of unstabilizing the
CPU and system performance.
Choices: Default; Use linear (1MHz stepping).
Redstorm
Overclocking
Tech
Please press <Enter> to start RED STORM OVER-
CLOCKING TECH, this option helps user an easy
way to overclocking, it will increase CPU external
clock automatically, when CPU external clock
increasing to unacceptable value, BIOS will restart
your system, then running at acceptable CPU
external clock.
CPU Vcore
Select
This item allows users to adjust the CPU Vcore
voltage. The instant damage of CPU is due to the
wrong Vcore voltage setting, so we highly recommend
that user should leave this item to Default setting
unless you fully understand it.
AGP Voltage
Select
This item allows users to adjust the AGP voltage.
The instant damage of Graphics card is due to the
wrong AGP voltage setting, so we highly recommend
that user should leave this item to Default setting
unless you fully understand it.
DIMM Voltage
Select
This item allows users to adjust the DIMM voltage.
The instant damage of DIMM is due to the wrong
Vcore voltage setting, so we highly recommend that
user should leave this item to Default setting unless
you fully understand it.
To Next Page
Loading...
