Sonel MIC-5010 - Page 14

MIC-5010, MIC-5005 – USER MANUAL
10
The setting sequence is as follows:
Test voltage U
n
,
times - in sequence t1 (1...600 s), t2 (1...600 s, but >t1) and t3
(1...600 s, but >t2) and t (independent of t1, t2 and t3: 1 s...99 min
59 s),
Setting of the times t1...t3.
Setting of the time t.
current I
ISO
: 1,2 mA or 3 mA,