Sonel MPI-506 - Low-voltage resistance measurement

MPI-506 – USER MANUAL
35
3.7 Low-voltage resistance measurement
NOTE!
Do not connect to the meter voltage above 440 V DC as this can damage the in-
strument.
3.7.1 Test leads resistance compensation – auto-zeroing
 Switch on the meter.
 Set the rotary switch to the R
CONT
R
x
position.
Set auto-zeroing according to the following algorithm.
R
◄►
R
CONT
◄►
AUTO-ZERO
Close the test leads.
Press START to commence the auto-zeroing.