Sonel MPI-506 User Manual

MPI-506 – USER MANUAL
44
4.2 Changing the cell and bank number
After the measurement, press ENTER. The meter
is in the memory enter mode.
The cell number is flashing.
Use the arrows to change the cell number.
Use the SET/SEL button to set the active (flash-
ing) cell or bank number.
The bank number is flashing.
Use the arrows to change the bank num-
ber.
4.3 Browsing the memory
 Switch on the meter.
 Set the rotary switch to the MEM position.
The content of last saved cell is displayed.
The cell number is flashing.
The bank and cell number which you wish to
browse is changed with the SET/SEL button and
then with the arrows. If the cell/ bank
number is flashing, it can be changed.

Sonel MPI-506 Specifications

General

Brand	Sonel
Model	MPI-506
Category	Measuring Instruments
Language	English