MPI-506 – USER MANUAL
4.4 Clearing the memory
4.4.1 Clearing the bank
Switch on the meter.
Set the rotary switch to the
MEM
position.
Set the number of bank to be cleared as described
in sec. 4.2.
Set the cell number to (before 1). The
message appears, signaling that the meter is
ready to delete.
Press ENTER. The and symbols
appear, requiring confirmation.
Press ENTER to start deleting or ESC to
abort.
The deletion progress is shown on the
screen as scrolling cell numbers. When
deletion is completed, the meter generates
three short audio signals and sets the cell
number to 1.
To Next Page
Loading...
Need help?
General
