Sonicware LIVEN 8bit warps - External Input Settings; Changing the Gain; Changing Reverb Send Amount; Setting Mono;Stereo

External input settings
23
This section explains adjustments related to external
input.
Changing the gain
① While pressing (lights green), press LINE IN,
and select GAIN.
②
Turn the
VALUE knob to change the gain.
ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー
• The gain is shown on the display.
• The adjustment range is MUTE–127.
• This can be adjusted from －∞ to +6 dB.
• 90 is 0 dB.
Changing the reverb send amount
① While pressing (lights green), press LINE IN,
and select RVB.
② Turn the
VALUE knob to change the send amount.
ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー
• The send amount is shown on the display.
• The adjustment range is OFF, 1–127.
• This can be adjusted from －∞ to +6 dB.
• 90 is 0 dB.
Setting mono/stereo
① While pressing , press
LINE IN, and select
MONO.
②
Turn the
VALUE knob to turn it on/o󱐯.