Sonicware LIVEN 8bit warps - Appendix; Figure 1: Sound Architecture; Table 1: Synthesizer Engine Parameter List

Appendix
29
Table 1. Synthesizer engine parameter list
Figure 1. Sound architecture
Synth engine
shift
button
Main knob 1 Main knob 2 Main knob 3
WARP
OFF
Waveform 1 Waveform 2 Crossfade
MEM, preset waveforms
1–63, U-01–U-64 (user
waveforms)
MEM, preset waveforms
1–63, U-01–U-64 (user
waveforms)
<63 – <00> – 63>
ON ― ― ―
ATTACK
OFF
Waveform 1 Waveform 2 Waveform switching time
MEM, preset waveforms
1–63, U-01–U-64 (user
waveforms)
MEM, preset waveforms
1–63, U-01–U-64 (user
waveforms)
0–127
ON ― ― ―
MORPH
OFF
Waveform 1 Waveform 2 Morphing time
MEM, preset waveforms
1–63, U-01–U-64 (user
waveforms)
MEM, preset waveforms
1–63, U-01–U-64 (user
waveforms)
0–127
ON
Waveform 3 Morphing mode ―
MEM, preset waveforms
1–63, U-01–U-64 (user
waveforms)
2 (waveform 1 → wave
-
form 2 → waveform 1
……), 3 (waveform 1 →
waveform 2 → waveform
3 → waveform 1……)
―
FM
OFF
Ratio Level LFO rate
0.5–32 0–127 0–127
ON
Ratio depth Level depth Waveform
0–127 0–127
SINE (sine wave), SQAR
(square wave), TRI (triangle
wave), SAW (saw wave),
R.SAW (reverse saw wave),
RAND (random wave), LOG
(logarithmic wave), R.LOG
(reverse logarithmic wave)