7
© Copyright 2018 Karaoke Home Entertainment www.khe.com.au / www.khe.co.nz / www.picknmix.com.au
Download & Install Song Book Generator For MP600’s Purchased Before July 2017 ............................................... 12
Formatting the CSV Excel Song List For an MP600 ........................................................................................................ 13
MP600 FAQ Page............................................................................................................................................................. 19
Sonken MP4000 Karaoke Machine Guide.................................................................................................................. 20-34
How to Connect Your MP600
Your Sonken MP600 Karaoke Player has the power cable connected to the unit, that
just needs to plug into a wall power socket. Then it also has the red, white and
yellow RCA / AV Cables (included in the box).
Your karaoke player can be plugged straight into your TV for quick karaoke fun
however, the sound output will be reflective of your television speakers.
Connection
If you wish to use your TV for the visual on-screen lyrics and the sound, you
must plug all red, white and yellow RCA cables into matching Video and
Audio connections on your TV and select the appropriate AV Channel on
via the TVs source or input selector.
Please Note: You may get a voice delay when using your TV only, as TVs
have very small speakers and are not designed for karaoke use, you will
need to turn your TV volume up considerably in order to hear it properly
and you may still get delay. This is a limitation of the TV and we always
recommend you use a dedicated speaker, we only ever use a TV for the on-
screen lyrics.
Amplifier & Speaker / Powered
Speaker using L/R Audio
Plug the yellow cable from the AV
cable included into a matching
yellow Video Input connector on
your TV.
If your amplifier or powered
speaker has the red and white RCA
connections, you can plug that
straight in from the karaoke player
to matching connections on your
speaker.
Powered Speaker using AUX Input
Plug the yellow cable from the AV
cable included into a matching
yellow Video Input connector on
your TV.
You will need a RCA (red and white)
to AUX jack plug in order to connect
your MP600 to the Powered
Speaker via the AUX input.
To Next Page
Loading...