Sonos S14
11
• If you want to associate the SUB with a different Sonos speaker, select Choose Room for SUB and then
select another room.
• If you are not going to use the SUB right now, select Don’t use SUB. It will appear in Rooms as SUB
(unused) until you select it and associate it with another Sonos speaker.
Surround speakers
You can easily pair two speakers, such as two PLAY:5s, with a Sonos home theatre product to function as left
and right surround channels in your Sonos surround sound experience.
• Make sure the Sonos products are the same—you can’t combine two different speaker types to function
as surround speakers.
• Be sure to follow these instructions to set up your surround speakers. Do not create a room group or
stereo pair as these will not achieve the left and right surround channel functionality.
Add surround speakers
If you’re using a mobile device
1. Go to More > Settings > Room Settings.
2. Select the room the S14 is located in.
3. Tap Add Surrounds.
If you’re using a computer
1. Select Manage > Settings (PC) or Sonos > Preferences (Mac).
2. Select Room Settings if it is not already highlighted on the left.
3. Choose the room the S14 is located in from the Room Settings for drop-down list.
4. From the Basic tab, select Add Surrounds.
Remove surround speakers
If you’re using a mobile device
1. Go to More > Settings > Room Settings.
2. Select the room the surround speakers are associated with. The room name appears as Room (+LS+RS)
in Room Settings.
3. Tap Remove Surrounds.
4. Tap Next to drop the surround sound speakers from your surround system. If these were newly
purchased speakers they will appear as Unused in Rooms. If these speakers existed in your household
previously, they revert back to their previous state.
You can now move them to another room for individual use.
If you’re using a computer
1. Select Manage > Settings (PC) or Sonos > Preferences (Mac).
2. Select Room Settings if it is not already highlighted on the left.
3. Choose the room the S14 is located in from the Room Settings for drop-down list. The room name
appears as Room (+LS+RS).
To Next Page
Loading...
Need help?
General
