Sonos S14
9
If you’re adding to an existing Sonos system:
a. Check to see if there’s a Sonos software update available. If you see one, please update your Sonos
system before adding the S14. (S14 is compatible with Sonos software versions 7.2 and later).
b. Go to More > Settings > Add a Player or SUB.
c. Add any other Sonos products you purchased.
You may be prompted to update the new Sonos product(s) after you add them.
Note: Thick walls, 2.4 GHz cordless telephones, or the presence of other wireless devices can interfere with
or block the wireless network signals from Sonos. If you’re experiencing difficulty, you can try one of
these—relocate the Sonos product; change the wireless channel your music system is operating on;
connect a Sonos product to your router if your setup is currently wireless.
If you need help
• If your TV speakers are on, see Turn off your TV’s speakers.
• For help with the remote control, see Set up a remote control.
• Turn off messages when adjusting volume, see Eliminate annoying messages on your TV when using
a cable, satellite, or set top box remote or 22.
• Playing music through the S14, see Play music
SUB
Add a Sonos SUB
You can pair a SUB with the S14 to add to your cinematic experience.
If you’re using a mobile device
1. Go to More > Settings > Room Settings.
2. Select the room the S14 is located in.
3. Tap Add SUB.
If you’re using a computer
1. Select Manage > Settings (PC) or Sonos > Preferences (Mac).
2. Select Room Settings if it is not already highlighted on the left.
3. From the Basic tab, select Add SUB.
To Next Page
Loading...
Need help?
General
