Sonos S14
17
If you’re using a computer
1. Select Manage > Settings (PC) or Sonos > Preferences (Mac).
2. Select Room Settings if it is not already highlighted on the left.
3. Choose the room the S14 is located in from the Room Settings for drop-down.
4. Select the TV Dialog tab.
5. Click and drag the Audio Delay (Lip Sync) slider to increase or decrease the sound delay if the image and
the audio are not in sync.
6. Close the Settings window when changes are complete.
Additional TV sound options
Speech Enhancement
Makes the TV dialog easier to hear. Touch the icon on the Now Playing
screen to turn this setting on or off. (If
the setting isn’t visible, make sure the room with the S14 is selected.)
Night Sound
Adjusts the audio for night time viewing so you can reduce the volume and still experience pr
oper balance and
range. At lower volumes, quiet sounds are enhanced and the intensity of loud sounds is reduced. Touch the
icon on the Now Playing screen to turn this setting on or off. (If the setting isn’t visible, make sure the room
with the S14 is selected.)
TV autoplay
When TV Autoplay is set to On, TV audio automatically plays through the S14 when you turn on your TV—if
music is playing when the TV is turned on, the music immediately stops and the S14 switches to TV audio.
Additionally, if the S14 is in a room group when the TV is turned on, it automatically drops from the group. This
setting is On by default.
If you’re using a mobile device
1. Go to More > Settings > Room Settings.
2. Select the room the S14 is located in.
3. Tap TV Setup and Control > TV Autoplay.
4. Select On or Off.
If you’re using a computer
1. Select Manage > Settings (PC) or Sonos > Preferences (Mac).
2. Select Room Settings if it is not already highlighted on the left.
3. Choose the room the S14 is located in from the Room Settings for drop-down.
4. Select the TV Setup tab.
5. Check the TV Autoplay checkbox to turn this setting on, uncheck to turn it off.
6. Close the Settings window when changes are complete.