Product Guide
4
S14 back
HDMI connector
Ethernet port
AC power (mains)
Join
Ethernet Port
HDMI connector
AC Power (Mains) Input
Join button
Before you start
1. Make sure external components, such as a cable box or DVD player, are connected directly to your TV.
Next track
Previous track
Swipe left to right between the touch controls to get to the next track; swipe
right to left to hear the previous track.
(Next/Previous touch controls don’t work when you’re listening to a radio
station.)
IR (InfraRed) Sensors / Signal
Lig
hts
The IR sensor receives the signals sent by a remote control.
When the S14 receives a volume or mute command, the IR signal light displays
momentarily.
Use an Ethernet cable to connect the S14 to your Wi-Fi. Only use this port
to
plug in either the S14 or a Sonos BRIDGE or BOOST.
Connect the HDMI cable from the S14 to your TV’s HDMI ARC connector.
Note: If your
TV does not have an HDMI ARC connector, use an optical
adapter (see page 6).
Use only the supplied power cord to connect to a power outlet. Using a
thi
rd party power cord voids the warranty.
Press Jo
in to connect to Sonos.
To Next Page
Loading...
Need help?
General
