EasyManua.ls Logo

SONOVE M2-M - Mounting

SONOVE M2-M
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
M2-M Operating Manual | Mounting and Connecting
M2-M_Operating_Manual_2.0.0
14
3.1 MOUNTING
There are several options for mounting of the monitor. The product can be flush mounted into a plane surface
or console as well as in desktop, wall or ceiling position.
WARNING: Ensure correct orientation of the monitor! Non-observance of this information may
cause product damage and/or severe or fatal injuries!
· The monitor is only suited for mounting angles between
10°and 120° (refer to adjacend Figure)!
· The monitor is only suited for mounting in landscape or
portrait format!
Figure 4: Mounting angles of the monitor
For flush mounting of the monitor, please observe the following information:
1) Observe the data presented in the Technical Specification (Annex).
2) Use the cut-out dimensions that are included at the end of this
manual (Annex) to cut a correct opening in the console.
3) Secure monitor in position by connecting all the mandatory anchor
points of the monitor, the console mounting kit and the console.
4) Remove display protecting layer carefully.
Figure 5: Flush mounting with
console mounting kit
For desktop, wall or ceiling mounting of the monitor, please observe the
following information:
1) Observe the data presented in the Technical Specification (Annex).
2) Secure monitor in position by connecting all the mandatory anchor
points of the monitor, the mounting brackets and the installation
plate.
3) Remove display protecting layer carefully.
Figure 6: Desktop/ wall/ ceiling
mounting with mounting brackets
WARNING: Ensure proper mounting of product! Non-observance of this information may cause
electric shock or hazard, fire, product damage and/or severe or fatal injuries!
· Check bracket/ mounting kit for proper connection to all mandatory anchor points of the monitor!
· Check bracket/ mounting kit for proper connection to the installation plate!
INFORMATION
Please notice, that special accessories (mounting brackets/ console mounting kit) are required.
The kind of required accessories depends on the chosen mounting option.
Please notice, that accessories are not included in the delivery scope of the monitor.
They can be ordered on our website.