SAFETY NOTES
This manual contains important information which must be observed to ensure your own personal safety, as well
as the safety of the product and your equipment. The following safety notes must be read carefully to prevent
injury to people and damage to property. Before installing or operating the product make sure the safety notes
have been carefully read and understood.
SAFETY SYMBOLS
Notices which refer to your personal safety or property damage are highlighted by a warning triangle. Useful
information is highlighted with a corresponding symbol. The symbols and their meaning are as follows:
PROPER USE
The product may only be used for applications described in this manual and relevant documentation. Installation
and operation of the product must be performed in accordance with this manual, the relevant documentation
and described safety instructions.
The following actions are not allowed:
use of product non-conforming with this manual and relevant documentation
use of spare parts that are not certified and approved by the manufacturer
use of components, controls, adjustments, procedures, connections, or signal types other than those
specified in this manual and relevant documentation
OPERATING PERSONNEL
Installation and operation of the product must only be performed by qualified personnel, in accordance with the
relevant documentation and described safety instructions. Qualified personnel are persons who are trained,
instructed and authorized to install and operate the product. The authorization of the operating personnel must
be clearly specified by the product owner.
Furthermore, special qualifications for the following activities are required:
Instruction
must be performed by the manufacturer and instructed, qualified and authorized personnel
Positioning, Mounting, Operation and Disassembly
must be performed by instructed, qualified and authorized personnel
Maintenance, Service and Repair
must be performed by the manufacturer or instructed, qualified personnel, in consultation with the
manufacturer
The product owner is responsible for consequences resulting from product modifications and handling not
approved by the manufacturer, as well as use and operation under improper surrounding conditions.
To Next Page
Loading...