>> CCS Mode
Image Settings | Advanced | Noise Reduction | CCS Mode
Changes Cross-Color Suppression between off/adaptive/normal. Adjust for best image.
High setting may cause loss of detail, adjust for best image.
>> Dynamic NR Mode
Image Settings | Advanced | Noise Reduction | Dynamic NR Mode
Changes Dynamic Noise Reduction between low/medium/high/off/adaptive.
>> MPEG NR Mode
Image Settings | Advanced | Noise Reduction | MPEG NR Mode
Enables/disables the MPEG NR Mode.
>> MPEG NR
Image Settings | Advanced | Noise Reduction | MPEG NR
Allows the user to manually set the level of MPEG noise reduction.
> Video Processing
Image Settings | Advanced | Video Processing
(Only for S-Video, CVBS, YPbPr, RGB+CS, and video mode of DVI/HDMI)
>> Main DCDi
Image Settings | Advanced | Video Processing | Main DCDi
Turns DCDi on/off on main channel.
>> Main MADI Mode
Image Settings | Advanced | Video Processing | Main MADI Mode
Changes Motion Adaptive De-Interlacing between normal/off/adaptive modes.
> Film Mode & Scaling
Image Settings | Advanced | Film Mode & Scaling
(Only for S-Video, CVBS, YPbPr, RGB+CS, and video mode of DVI/HDMI)
This feature can be used to adjust image when viewing 2:2/3:2 pulled down video camera films.
>> Film Mode Detection
Image Settings | Advanced | Film Mode & Scaling | Film Mode Detection
Selection of Video-3:2/Video-2:2/Video-3:2-2:2/off.
>> Film Display Mode
Image Settings | Advanced | Film Mode & Scaling | Film Display Mode
Selection of Normal 3:2 or other future modes.
To Next Page
Loading...