Examples of the focusing frame display
The focusing frame differs as follows.
When focusing on a larger area
When focusing on a smaller area
When [ Focus Area] is set to [Wide] or [Zone], the focusing frame may switch between “When focusing on a larger
area” and “When focusing on a smaller area” depending on the subject or situation.
When you attach an A-mount lens with a Mount Adaptor (LA-EA3 or LA-EA5) (sold separately), the focusing frame
for “When focusing on a smaller area” may be displayed.
When focus is achieved automatically based on the whole range of the monitor
When you use a zoom function other than the optical zoom in the still image shooting mode, the [ Focus Area]
setting is disabled and the focusing frame is shown by the dotted line. The AF operates with priority on and around
the center area.
To move the focus area
When [
Focus Area] is set to [Zone], [Spot] or [Expand Spot], if pressing the button to which [Focus Standard] is
assigned, you can shoot while moving the focusing frame using the top/bottom/left/right sides of the control wheel. To
return the focusing frame to the center of the monitor, press the
(Delete) button while moving the frame. To
change the shooting settings using the control wheel, press the button to which [Focus Standard] is assigned.
Hint
To Next Page
Loading...
