Help Guide
Interchangeable Lens Digital Camera
ILCE-7CM2 α7CII
Recognition Target (still image/movie)
Selects the target to be recognized by the subject recognition function when autofocusing.
Menu item details
Human:
Recognizes humans as subjects.
Animal/Bird:
Recognizes animals and birds as subjects.
Animal:
Recognizes animals as subjects.
Bird:
Recognizes birds as subjects.
Insect:
Recognizes insects as subjects.
Car/Train:
Recognizes cars and trains as subjects.
Airplane:
Recognizes airplanes as subjects.
Detailed settings for each recognition target
By pressing the right side of the control wheel on the [
Recognition Target] screen, you can make detailed settings for
each recognition target. Functions other than [Recognition Priority Set.] can only be set in the still image shooting mode.
Tracking Shift Range
*1
*5
:
Sets the range for recognizing the subjects. Narrowing the range makes the camera shift the focus to a recognized
subject only when the subject is close to the tracking frame. Widening the range makes the camera shift the focus to a
recognized subject even when the subject is distant from the tracking frame. ([1(Narrow)] to [5(Wide)])
Tracking Persistence Lvl
*2
*5
:
Sets the sensitivity for whether to continue tracking around the subject or shift the focus to another subject that is closer
in shooting distance when a recognized subject is lost.
When set to [5(Locked On)], even under conditions where a recognized subject is lost, such as when the subject that
you want to shoot is temporarily hidden by another object, the camera continues to track the area around the subject.
When set to [1(Not Locked On)], under conditions where the camera cannot continue to track a recognized subject, such
as when the subject is moving fast, the camera cancels tracking and quickly shifts the focus to another subject that is
closer in shooting distance. ([1(Not Locked On)] to [5(Locked On)])
Recognition Sensitivity
*2
*5
:
Sets the sensitivity of subject recognition. The lower the setting, the easier it is to prevent false recognition. The higher
the setting, the easier it is to recognize subjects that are normally difficult. ([1(Low)] to [5(High)])
Recognition Priority Set.
*3
:
MENU →
(Focus) → [Subject Recognition] → [ Recognition Target] → desired setting.
1
To Next Page
Loading...
Need help?
General
