Help Guide
Interchangeable Lens Digital Camera
ILCE-7CM2 α7CII
Face Memory (still image/movie)
This function registers and deletes face data and sets whether to identify registered faces. Up to seven faces can be
registered. If you set one of the registered faces as the identification target, the face will be prioritized when focusing.
To choose a face to identify
Select the face you want to identify on the [
Face Memory] list screen and press the center of the control wheel. The
radio button for the face set as the identification target will turn on.
To delete a registered face
Select the face you want to delete on the [
Face Memory] list screen and press the (Delete) button. Then, select
[Delete This Face]. If you select [Delete All Faces], all registered faces will be deleted.
Note
When performing [
Face Memory], do so in a bright place with the subject facing forward. It will be easier to register a face if
you position it inside the frame in the center of the monitor and position the neck and shoulders under the frame. If the face is
hidden by a hat, mask, sunglasses, etc. or the neck or shoulders are hidden, you may not be able to register it correctly.
Even if you perform [Delete This Face], the registered face data will remain in the camera. If you want to delete it from the
camera as well, perform [Delete All Faces].
Related Topic
Regist. Face Priority (still image/movie)
TP1001171061
5-054-865-11(1) Copyright 2023 Sony Corporation
MENU →
(Focus) → [Subject Recognition] → [ Face Memory].
1
On the [
Face Memory] list screen, select the + icon frame and press the center of the control wheel.
2
Position the face you want to register in the frame in the center of the screen and press the center of the
control wheel.
The registered face will be displayed on the [
Face Memory] list screen.
3
To Next Page
Loading...
Need help?
General
