Help Guide
Interchangeable Lens Digital Camera
ILCE-7CM2 α7CII
Silent Mode Settings (still image/movie)
You can configure settings related to the silent mode, which allows you to shoot without shutter sounds or electronic
sounds. You can also set whether or not to change the settings for other functions that emit sounds from the camera
when the camera is set to the silent mode.
Menu item details
Silent Mode:
Sets whether or not to shoot without shutter sounds or electronic sounds. ([On]/[Off])
When set to [On], [Shutter Type] and [Shutter Type in Interval] become locked to [Electronic Shutter], and [Audio
Signal(Shooting)] becomes locked to [Off].
Target Function Settings:
Sets whether or not to simultaneously change the settings for other functions that emit sounds from the camera when the
camera is set to the silent mode. ([Aperture Drive in AF]/[Shutter When Pwr OFF]/[Auto Pixel Mapping])
If you select [Not Target], the setting values for each function will be retained even in the silent mode.
Note
Use the [Silent Mode] function on your own responsibility, while taking sufficient consideration to the privacy and portrait rights of
the subject.
Even if [Silent Mode] is set to [On], it will not be completely silent.
Even if [Silent Mode] is set to [On], the operating sound of the aperture and focus will sound.
If [Auto Pixel Mapping] is set to [On], shutter sounds may occasionally be heard when the power is turned off. This is not a
malfunction.
If [Shutter When Pwr OFF] under [Anti-dust Function] is set to [On], a shutter sound will be heard when the camera is turned off.
Image distortion caused by the movement of the subject or the camera may occur.
If you shoot images under instantaneous lightning or flickering lights, such as the flash light from other cameras or fluorescent
lighting, a striping effect may occur on the image.
When [Silent Mode] is set to [On], the following functions are not available:
Flash shooting
Long Exposure NR
BULB shooting
Anti-flicker Shoot.
Anti-dust Function
Related Topic
Shutter Type
Interval Shoot Func.
Aperture Drive in AF
MENU →
(Shooting) → [Shutter/Silent] → [ Silent Mode Settings] → desired setting.
1
To Next Page
Loading...
Need help?
General
