Help Guide
Interchangeable Lens Digital Camera
ILCE-7CM2 α7CII
Reg. Flash Shooting Set
The shutter speed and ISO sensitivity when shooting with the flash are kept separately from the settings when the flash
is not used. The camera determines whether or not the flash is turned on and automatically switches between settings.
Menu item details
Shutter Speed Range:
Sets [Min] and [Max] for the shutter speed during flash shooting. If you select [Sync Speed], the maximum shutter speed
that can be synced will be automatically set.
This setting is available when the shooting mode is set to P or A.
ISO:
Sets the ISO sensitivity for flash shooting.
This setting is available when the shooting mode is set to P, A, S, or M.
Hint
You can change these settings even when a flash is not attached.
For details on flashes that are compatible with this function, refer to the following support page.
https://www.sony.net/dics/ilce7cm2/
Related Topic
ISO (still image/movie)
TP1001171080
5-054-865-11(1) Copyright 2023 Sony Corporation
MENU →
(Exposure/Color) → [Flash] → [Reg. Flash Shooting Set].
1
Select an item to set for flash shooting, and then press the center of the control wheel to select the desired
setting.
2
Add checkmarks to the items that you want to recall when shooting with the flash, and then select [OK].
The setting will be saved.
3
To Next Page
Loading...
